Author Topic: Help Setting up TM Warthog axis  (Read 125 times)

Offline AKA_Clutter

  • Training Officer
  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 607
  • AKA_Wardogs
    • View Profile
Help Setting up TM Warthog axis
« on: November 23, 2018, 11:10:58 pm »
I am trying to switch from my older CH HOTAS to the TM warthog HOTAS.  I do TARGET to setup the key commands, and as such it combines the throttle and Joystick to one virtual axis.

When I go into the controls and setup the Pitch (Y-axis) It see the stick and assigns it as "JoySitck10_Y-axis.  However, there isn't any response if I try to set a curve, or in game.  Same with the roll and throttle.

Any clue as to what I am dong wrong?

TIA

Clutter


I7 8700K @ 4.8 GHz, 32 GB G.Skill DDR4 3600 RAM, Samsung 1 TB M.2,  Samsun 500 SDD, GB, EVGA 11080 FTW, Acer 27" Predator XB1, CH HOTAS and Pedals, Track IR 5,  Oculus Rift,

Offline AKA_Clutter

  • Training Officer
  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 607
  • AKA_Wardogs
    • View Profile
Re: Help Setting up TM Warthog axis
« Reply #1 on: November 24, 2018, 11:07:39 am »
Got it fixed (I think) after rebinding the conto9rls for the 6th time.


I7 8700K @ 4.8 GHz, 32 GB G.Skill DDR4 3600 RAM, Samsung 1 TB M.2,  Samsun 500 SDD, GB, EVGA 11080 FTW, Acer 27" Predator XB1, CH HOTAS and Pedals, Track IR 5,  Oculus Rift,

Offline AKA_Goshawk

  • Executive Officer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1114
  • "Death from above"
    • View Profile
    • Goshawk's Nest
Re: Help Setting up TM Warthog axis
« Reply #2 on: November 24, 2018, 12:42:51 pm »
Nathan:
In BOS there is a file that displays the controllers you are using. If you've made some adjustments to reprogram and controllers, they might be showing up as duplications in the file, which in my case caused some issues. I think it's one of the files in the data/input folder.

Hope this helps.

Gos


"Death from above"

Offline AKA_Clutter

  • Training Officer
  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 607
  • AKA_Wardogs
    • View Profile
Re: Help Setting up TM Warthog axis
« Reply #3 on: November 26, 2018, 02:10:07 pm »
Thsnks, Gos.  Ill take a look tonight.


I7 8700K @ 4.8 GHz, 32 GB G.Skill DDR4 3600 RAM, Samsung 1 TB M.2,  Samsun 500 SDD, GB, EVGA 11080 FTW, Acer 27" Predator XB1, CH HOTAS and Pedals, Track IR 5,  Oculus Rift,