Author Topic: COD training and engine management  (Read 1453 times)

Offline AKA_Wiley

  • AKA_Wardogs
  • Sr. Member
  • *
  • Posts: 287
  • AKA_Wardogs
    • View Profile
COD training and engine management
« on: April 12, 2015, 07:24:58 am »
  S! Its great that there are more AKAers starting or returning to cliffs,there are many things that must be gone over ,guns and loadouts convergence engine management settings and a host of other items as well as what you can and cannot get away with in combat why don't we try to have a squad practice night hows Wed eves? we can do it whatever week night is best for all of us, it really is needed as there is a fairly steep learning curve and with some practice and proper settings can be mastered quite quickly.

Offline AKA_Goshawk

  • Executive Officer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1180
  • "Death from above"
    • View Profile
    • Goshawk's Nest
Re: COD training and engine management
« Reply #1 on: April 12, 2015, 08:35:26 am »
Wednesday is a good idea, then we'll get a sense of those who might be able to participate in the Wednesday evening campaign in SOW once that starts up.
I'll try to be there.
We need to get the rest of the guys who signed up for SOW assigned so they can actually fly in the server though.
I was with Ram and he went through all the steps MattE spelled out, but still could not fly in the server. What's with that???
Gos


"Death from above"

Offline AKA_Wiley

  • AKA_Wardogs
  • Sr. Member
  • *
  • Posts: 287
  • AKA_Wardogs
    • View Profile
Re: COD training and engine management
« Reply #2 on: April 12, 2015, 09:59:16 am »
 S! Gos they should be good now I accepted Recon,Ram and TG the last couple of days

Offline AKA_MattE

  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 1417
    • View Profile
Re: COD training and engine management
« Reply #3 on: April 12, 2015, 01:44:14 pm »
Remember anyone can fly on the SOW server, they just need to use one of the Open bases if they are not assigned to the squadron.  Only registered AKA squadron members can fly from Rodchester.

MattE

Certified DCS Aircraft

Offline AKA_Goshawk

  • Executive Officer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1180
  • "Death from above"
    • View Profile
    • Goshawk's Nest
Re: COD training and engine management
« Reply #4 on: April 12, 2015, 03:25:49 pm »
when we've tried to launch from Watchfield, they have not been able to get into the cockpit.
We'll keep trying.


"Death from above"

Offline AKA_MattE

  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 1417
    • View Profile
Re: COD training and engine management
« Reply #5 on: April 12, 2015, 06:41:05 pm »
We can get on Comms one night and figure out what is wrong.

MattE

Certified DCS Aircraft

Offline HellCat (Sully)

  • Guest
  • Hero Member
  • *
  • Posts: 850
    • View Profile
Re: COD training and engine management
« Reply #6 on: April 12, 2015, 07:11:12 pm »
See ya' all Wednesday  8)
Cougar PS 700W l i5-7600K @ 4.7 l 16GB DDR4 2400 Ram l 500GB Corsair SSD & addlink SSD 512GB l GTX1080Ti black edition l Win7 64 bit

Offline Recon

  • Guest
  • Hero Member
  • *
  • Posts: 976
    • View Profile
Re: COD training and engine management
« Reply #7 on: April 13, 2015, 05:39:29 am »
Hoping to make these.  Wednesday is a good day for me - (probably looking at around 9pm EST for myself)

Offline AKA_FiveIron

  • AKA_Wardogs
  • Newbie
  • *
  • Posts: 31
    • View Profile
Re: COD training and engine management
« Reply #8 on: April 13, 2015, 09:32:52 am »
I have my COD patched up and will try to make it a well. I could use some help with the engine management stuff.

Offline AKA_Scorp

  • Administrator
  • Hero Member
  • *****
  • Posts: 583
    • View Profile
Re: COD training and engine management
« Reply #9 on: April 13, 2015, 10:04:07 am »
I'm away again this Wed but will try to make it after that.
AKA_Scorp

Offline HellCat (Sully)

  • Guest
  • Hero Member
  • *
  • Posts: 850
    • View Profile
Re: COD training and engine management
« Reply #10 on: April 15, 2015, 07:24:54 pm »
Couldn't make it tonight ....bummed
Cougar PS 700W l i5-7600K @ 4.7 l 16GB DDR4 2400 Ram l 500GB Corsair SSD & addlink SSD 512GB l GTX1080Ti black edition l Win7 64 bit

Offline AKA_MattE

  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 1417
    • View Profile
Re: COD training and engine management
« Reply #11 on: April 15, 2015, 07:58:02 pm »
Same, I could not make it tonight, sorry.

MattE

Certified DCS Aircraft

Offline Recon

  • Guest
  • Hero Member
  • *
  • Posts: 976
    • View Profile
Re: COD training and engine management
« Reply #12 on: April 16, 2015, 06:03:59 am »
Enjoyed last night, we strafed some airfields.

Wiley and I used a full tank of gas finally landing with like 3 gallons left.

Offline Recon

  • Guest
  • Hero Member
  • *
  • Posts: 976
    • View Profile
Re: COD training and engine management
« Reply #13 on: April 29, 2015, 05:19:15 pm »
anyone around tonight ?  barracks is empty !

Offline AKA_MattE

  • AKA_Wardogs
  • Hero Member
  • *
  • Posts: 1417
    • View Profile
Re: COD training and engine management
« Reply #14 on: April 29, 2015, 06:38:36 pm »
Sorry Recon, I cant get on tonight, wife has got me cornered...

MattE

Certified DCS Aircraft